NEC EXPRESS5800/140He Service Manual page 98

5. To replace the FD drive, remove the screw (1) fixing the FD drive module on the front of
the Server.
To replace the CD-ROM drive or FD/CD board, remove the screw (1) fixing the
CD-ROM module on the front of the Server.
6. To replace the FD drive, pull out the FD drive module toward you from the Server.
To replace the CD-ROM drive or FD/CD board, hold the handle on the CD-ROM module
to pull out it toward you from the Server.
7. To replace the FD drive, remove the drive from the FD bracket (no screws are required to
fix them).
8. To replace the CD-ROM drive or FD/CD board, remove the screws (2) fixing the CD/FD
board to remove it.
9. Remove the CD-ROM drive and tray as shown in the photo below (no screws are
required to fix them).
10. Remove the CD/FD board from CD-ROM drive.
11. Do the reverse procedure for the installation.
- -
82
FD drive module
fixing screw
CD-ROM module
handle
CD-ROM module
fixing screw