Notes On Installing And Accessing The Rack Cabinet - NEC EXPRESS5800/140He Service Manual

Notes on Installing and Accessing the Rack Cabinet

CAUTION
Do not carry or install the rack cabinet only by a single person.
More than one person is required to carry or install the rack. Failure to follow this
instruction may cause the rack to fall to result in personal injury and/or breakages
of surrounding devices. In particular, a high rack (such as 44U rack) is unstable if it
is not fixed by stabilizers. More than one person must always carry or install the
rack while they support it.
Do not install the rack cabinet so that the load may be concentrated on a specific
point.
Install stabilizers on the rack so that the total load of the rack and devices mounted
on the rack is not concentrated on a singe point or join more than one rack with
each other to distribute the load. Failure to follow this instruction may cause the
rack to fall to result in personal injury.
Do not install components on the rack cabinet only by a single person.
More than one person is required to install parts including the doors and trays for
the rack. Failure to follow this instruction may cause some parts to fall to be broken
and/or to result in personal injury.
Do not leave more than one device being pulled out from the rack.
Pulling out more than one device from the rack may cause the rack to be fallen.
Only pull out a single device from the rack at a time.
Do not provide the wiring for the server to exceed the rating of the power supply.
To prevent burns, fires, and device damages, the power supplied to the server shall
not exceed the rating load of the power branch circuit. The server requires at least
two Power Cords or up to four Power Cords (depends on your configuration).
Connect each power cord to each appropriate Wall Outlet provided with 20A
branch circuit. Contact your electric constructor or the local power company for the
requirements on the wiring and installation of electric facilities.
- -
v