Device Replacement (2); Removal Or Installation Of Rear Access Cover - NEC EXPRESS5800/140He Service Manual

4.10 Device Replacement (2)

Before any device other than those described in Section 4.9 above can be removed, the rear and
front access covers must be removed in the status that the Server is pulled out from the rack.
Refer to the User's Guide for how to pull out the Server from the rack.
4.10.1

Removal or Installation of Rear Access Cover

1. Loosen the captive screw fixing the rear access cover by using a proper screwdriver, slide
the cover to the rear direction, and lift the cover to remove it from the Server.
Captive screw
Captive screws
2. When the rear access cover is installed, check that no tools and screws are left in the
Server, that the proper devices are securely installed in the Server, and that there are no
uninstalled devices.
3. Mate the tab on the rear access cover with the slot on the frame of the Server, slide the
rear access cover to the front direction while pressing it to the Server lightly, and fasten
the captive screw to fix it.
- -
84