Dynamic Ip Connection - ZyXEL Communications NBG-418N User Manual

By implementing PPPoE directly on the NBG-418N v2 (rather than individual computers), the
computers on the LAN do not need PPPoE software installed, since the NBG-418N v2 does that part
of the task. Furthermore, with NAT, all of the LAN's computers will have Internet access.
Figure 10 Wizard Step 2: PPPoE Connection
The following table describes the labels in this screen.
Table 4 Wizard Step 2: PPPoE Connection
LABEL
PPPoE
User Name
Password
Confirm Password
Account Validate
Back
Next
Exit

3.2.2 Dynamic IP Connection

Use the dynamic IP connection when your network administrator or ISP assigns your IP address
dynamically.
Chapter 3 Connection Wizard
DESCRIPTION
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Type the password again for confirmation.
Click the Account Validate button to establish the Internet connection via PPPoE
encapsulation.
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
NBG-418N v2 User's Guide
22