Scheduling Screen - ZyXEL Communications NBG-418N User Manual

Figure 50 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
Table 26 Network > Wireless LAN > WPS Station
LABEL
Push Button
Or input station's
PIN number

6.9 Scheduling Screen

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is
disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at
certain times. To open this screen, click Network > Wireless LAN > Scheduling tab.
Figure 51 Network > Wireless LAN > Scheduling
Chapter 6 Wireless LAN
DESCRIPTION
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations's wireless settings. See
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
Use this button when you use the PIN Configuration method to configure wireless station's
wireless settings. See Section 5.3.2 on page
Type the same PIN number generated in the wireless station's utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
NBG-418N v2 User's Guide
Section 5.3.1 on page
48.
71
47.