What You Can Do - ZyXEL Communications NBG-418N User Manual

6.2 What You Can Do

Wireless screens vary according to the device mode you are using.
Wireless Screen
General
MAC Filter
Advanced
WPS
WPS Station
Scheduling
MBSSID
AP Select
WLAN
Information
See Chapter 4 on page 28
• Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless
security mode
• Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the NBG-418N v2
• Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS Threshold
6.6 on page
• Use the WPS screen to quickly set up a wireless network with strong security, without having to
configure security settings manually
• Use the WPS Station screen to add a wireless station using WPS
• Use the Scheduling screen to set the times your wireless LAN is turned on and off
on page 71).
• Use the MBSSID screen to configure multiple wireless networks on the NBG-418N v2
6.10 on page
• Use the AP Select screen to choose an access point that you want the NBG-418N v2 (in
universal repeater mode) to connect to. You should know the security settings of the target AP
(Section 6.11 on page
• Use the WLAN Information screen to view the SSID and security of the selected AP wireless
network (Section 6.12 on page
Chapter 6 Wireless LAN
Router







for more information on device modes.
(Section 6.4 on page
(Section 6.5 on page
69).
72).
73).
75).
NBG-418N v2 User's Guide
Access Point Universal Repeater
 
 
 
 
 
 
 

63).
68).
(Section 6.7 on page 69).
61
Client Bridge



(Section
(Section 6.8 on page 70).
(Section 6.9
(Section