Advanced Screen - ZyXEL Communications NBG-418N User Manual

The following table describes the labels in this screen.
Table 58 Management > Bandwidth MGMT > Bandwidth MGMT
LABEL
Service Management
Enable Bandwidth
Management
Apply
Reset

17.5 Advanced Screen

Use this screen to set up the QoS rules for the NBG-418N v2. Click Management > Bandwidth
MGMT > Advanced. The following screen displays.
Figure 100 Management > Bandwidth MGMT > Advanced
The following table describes the labels in this screen.
Table 59 Management > Bandwidth MGMT > Advanced
LABEL
QoS Setup
Total Bandwidth (0,
Unlimited)
Up Stream
Down Stream
Apply
Reset
QoS Rules
#
Source IP Address
Max Bandwidth(kpbs)
Up Ceiling
Chapter 17 Bandwidth MGMT
DESCRIPTION
Click the Enable Bandwidth Management check box to activate the bandwidth
management feature in the NBG-418N v2.
Click Apply to save your changes in t his screen.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
This field shows the maximum number of data in kbps the NBG-418N v2 is allowed to
send out and allowed to come in through a source interface.
Type the Up Stream or maximum outgoing transmission data rate (kbps) that is
allowed to go through the source interface on the NBG-418N v2.
Type the Down Stream or maximum incoming transmission data rate (kbps) that is
allowed to go through the source interface on the NBG-418N v2.
Click Apply to save your changes back to the NBG-418N v2.
Click Reset to begin configuring this screen afresh.
This field shows the index number of the QoS rule.
This field shows the source IP Address of the data traffic.
This field shows the maximum outgoing transmission data rate (kbps) that is allo wed to
go through the source interface on the NBG-418N v2.
NBG-418N v2 User's Guide
135