Universal Repeater Navigation Panel - ZyXEL Communications NBG-418N User Manual

Table 14 Status Screen (Universal Repeater Mode) (continued)
LABEL
- Operating Channel
- Security Mode
- 802.11 Mode
- WPS
WLAN STA Information
- SSID
- Security Mode
- Connection Status
System Status
Operation Mode
System Up Time
Current Date/Time
Summary
Client table
Packet Statistics
Message

4.4.2 Universal Repeater Navigation Panel

Use the menu in the navigation panel to configure NBG-418N v2 features in Universal Repeater
Mode.
The following screen and table show the features you can configure in Universal Repeater Mode.
Figure 28 Menu: Universal Repeater Mode
Chapter 4 Modes
DESCRIPTION
This shows the channel number which the NBG-418N v2 is currently using over
the wireless LAN.
This shows the level of wireless security the NBG-418N v2 is using.
This shows the IEEE 802.11 standard that the NBG-418N v2 supports. Wireless
clients must support the same standard in order to be able to connect to the
NBG-418N v2
This shows the WPS (WiFi Protected Setup) Status. Click the link to display
Network > Wireless LAN > WPS screen.
This is the name of the selected AP that the NBG-418N v2 is associating with.
This shows the wireless security the NBG-418N v2 is using to connect to the
AP.
This shows whether the NBG-418N v2 is currently associated with the selected
AP.
This field shows the device operating mode: Router, Access Point,
Universal Repeater or Client Bridge.
This is the total time the NBG-418N v2 has been on.
This field displays your NBG-418N v2's present date and time.
Use this screen to view current client information. Click "Details..." to see the
screen.
Use this screen to view port status and packet specific statistics. Click
"Details..." to see the screen.
Use this screen to view the status of the NBG-418N v2.
NBG-418N v2 User's Guide
41