21.1 Overview
The Sys OP Mode (System Operation Mode) function lets you configure select the device operation
mode: Router, Access Point, or Universal Repeater.
See
Chapter 4 on page 28
21.2 General Screen
Use this screen to select how you connect to the Internet.
Figure 113 Maintenance > Sys OP Mode > General
The following table describes the labels in the General screen.
Table 65 Maintenance > Sys Op Mode > General
LABEL
System Operation Mode
Router
Access Point
C
for more information on which mode to choose.
DESCRIPTION
Use Router mode if you want to use routing functions such as LAN DHCP, NAT, firewall
and so on, on the NBG-418N v2 (N). The NBG-418N v2 has separate LAN and WAN
network IP addresses.
Use Access Point mode if you already have a Router (R) in your network and you want
to bridge all wired and wireless network connections.
NBG-418N v2 User's Guide
148
HAPTER
Sys OP Mode
2 1