Status Screen (Universal Repeater Mode) - ZyXEL Communications NBG-418N User Manual

4.4.1 Status Screen (Universal Repeater Mode)

Click on Status. The screen below shows the status screen in Universal Repeater mode.
Figure 27 Status Screen (Universal Repeater Mode)
The following table describes the labels shown in the Status screen.
Table 14 Status Screen (Universal Repeater Mode)
LABEL
Device Information
System Name
Firmware Version
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP Server
WLAN AP Information
- MAC Address
- Status
- Name (SSID)
- Channel
Chapter 4 Modes
DESCRIPTION
This is the System Name you enter in the Maintenance > System >
General screen. It is for identification purposes.
This is the current firmware version of the NBG-418N v2.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP server.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - On, Off, or Off by
scheduler.
This shows a descriptive SSID name used to identify the NBG-418N v2 in the
wireless LAN.
This shows the channel number which you select manually or the NBG-418N
v2 automatically scans and selects.
NBG-418N v2 User's Guide
40