Adjustment Of Chain - Yukon Trail Badger 100 Owner's Manual

ADJUSTMENT OF CHAIN

1. When chain adjustment is needed, loosen 4 bolts under engine.
2. Move engine forward to tighten chain or backward to loosen chain.
3. Tighten bolts under engine Torque bolts to 25 ft./lbs.
4. Repetitively check tension of chain.
Engine adjusting bolts
Loosen
GREASING PROCEDURES TO THE DRIVEN CHAIN
1. Shut off the engine
2. Add light amounts of machine oil or chain grease to the driving
chain. (Too much machine oil or chain grease may cause
splattering to occur.)
Attention:
The chain should be replaced when the adjusting limit has reached
it's maximum.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.
Loosen
Chain
MINOR CHAIN ADJUSTMENT
1. When minor chain adjustment is
Chain
needed, turn "Nut " clockwise to
tighten chain or counterclockwise
to loosen chain.
2. When adjustment is accomplished,
tighten Nut 2.
Nut
Tighten
Chain