Engine Starting And Stopping - Yukon Trail Badger 100 Owner's Manual

ENGINE STARTING AND STOPPING

Never start the engine in a closed place as the exhausted
gas from the vehicle contains toxic carbon monoxide.
1. Ensure there is fuel in fuel tank and oil in crank case.
2. Set fuel valve lever to "ON" position
3. Place choke lever in "ON" position
4. Start engine with pull start cord.
5. Allow engine to idle until engine is warm
6. Move carburetor choke lever toward "OFF" position when engine
has sufficiently warmed up. Note: Engine may run ideally with
choke lever placed between "ON" position and "OFF" Position.
Choke Lever
OFF
P rocedures for stopping engine:
1. Release throttle twist grip to slow down engine.
2. Depress stop button located on right hand grip. Depress button until
engine comes to a complete stop
3. Set fuel valve lever (the fuel tank valve) handle to "OFF" position.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.
OFF
ON Fuel valve lever
ON