Vehicle Washing - Yukon Trail Badger 100 Owner's Manual

Cleaning the vehicle regularly can slow down the color fading of its
body and make it easier to check if there is any damage and any oil
leakage.
CAUTION
Washing the Mini Bike with over-pressurized water may cause
damage to some of its components. Therefore, do use a pressure
washer to clean the vehicle. The following parts should be
cleaned using low pressure water:
— Wheel hub
— Exhaust pipe
— Fuel tank and lower portion of cushion
— Carburetor
— Head lock and ignition switch
— Meters
1. After pre-wiping, the vehicle should be washed with clean
water to remove dirty residues
Plastic subassemblies should be cleaned by wiping with a cloth
or foam soaked in neutral detergent solution, followed by
washing with clean water.
2. After the cleaned vehicle is air dried, grease the chain and run
the engine at idling speed
3. Prior to driving, carefully check the braking system repeatedly
and repair or adjust it if
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.

VEHICLE WASHING

so as to prevent corrosion.
for a few minutes.
necessary.