Troubleshooting; Electrical Schematic - Yukon Trail Badger 100 Owner's Manual

TROUBLESHOOTING

Engine will not Start
1. Fuel valve OFF
2. Choke OPEN
3. Out of fuel
4. Bad fuel; engine stored without
treating or draining gasoline, or
refueled with bad gasoline
5. Spark plug faulty, fouled, or
improperly gapped
6. Spark plug wet with fuel
(flooded engine)
7. Fuel filter clogged, carburetor
malfunction, ignition
malfunction, valves stuck, etc.
Engine Lacks Power
1. Filter element (s) clogged
2. Choke lever may be not fully
open
3. Bad fuel; engine stored without
treating or draining gasoline, or
refueled with bad gasoline.
4. Fuel filter clogged, carburetor
malfunction, ignition malfunction ,
valves stuck, etc.

ELECTRICAL SCHEMATIC

DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.
Move Fuel valve lever to ON.
Move Chock Lever to CLOSED
Refuel
Drain fuel and carburetor.
Refuel with fresh gasoline
Remove and inspect spark plug.
Clean, gap, or replace
Remove and inspect spark plug.
Dry and reinstall spark plug.
Take the engine to a qualified
mechanic. Replace or repair
faulty components as necessary
Check air filter Clean or replace.
Check choke lever
Drain fuel tank and carburetor.
Refuel with fresh gasoline.
Take engine to a qualified
mechanic. Replace or repair
faulty components as necessary.