Inspection Before Riding - Yukon Trail Badger 100 Owner's Manual

INSPECTION BEFORE RIDING

ITEM TO CHECK CONTENT
Steering Smoothness; No restriction of movement; No
play or looseness
Brakes Proper brake lever free play; enough brake
force.
Tires Proper air pressure; Enough tread depth; No
cracks, rips, or other damages Note: Check tire
pressure, spec is located on side of tire.
Fuel Enough fuel for the intended trip; Fuel hose
connected securely; No damage to fuel tank or
cap; Fuel tank cap closed securely
Engine stop switch Proper operation
Engine oil Proper level – Check oil by inspecting Engine Oil
Dip Stick. The engine oil should be between the
Minimum and Maximum lines.
Throttle Proper free play of throttle lever; smooth
response; quick return to idle position
General condition Bolts and nuts are tight; no rattle from any parts
of the engine when running, no visible
evidence of Damage
Failing to inspect the Mini Bike before operating could be hazardous.
Failing to perform proper maintenance could also be hazardous.
Failing to inspect and maintain your Mini Bike could increases the
chances of an accident or equipment damage
Always inspect your Mini Bike each time before riding, and make sure
it is in a safe operating condition. Refer to the INSPECTION AND
MAINTENANCE section in this manual.
Operating this Mini Bike with improper tires, or improper tire air
pressure could be hazardous.
If you use improper tires or improper air pressure, you may lose
control of the Mini Bike. This will cause an accident.
Always use the tires with size and type tires specified in this user's
manual. Always maintain proper tire air pressure as described in the
INSPECTION AND MAINTENANCE section.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.