Fuel Fill; Fuel Valve - Yukon Trail Badger 100 Owner's Manual

FUEL AND FUEL VALVE OPERATION
Fuel filling
The capacity of the fuel tank is 4.2L (.95 gal) . Unscrew the gas cap by
turning it counter clockwise and carefully fill the tank with unleaded
gasoline through the opening. DO NOT MIX GAS AND OIL TOGETHER,
THIS IS A 4-STROKE ENGINE. Replace the gas cap by carefully aligning
the threads on the cap and the tank and turning the cap clock wise.
Wipe any spilled fuel from the dirt bike using a cloth and dispose of
the cloth properly. DO NOT SMOKE OR REFUEL THE VEHICLE NEAR
OPEN FLAMES OR NEAR HEATING UNITS. ONLY REFUEL THE VEHICLE IN
OPEN AREAS TO REDUCE THE LIKELIHOOD OF THE BUILD UP OF
GASOLINE FUMES.
Overfilling the fuel tank could be hazardous.
If you overfill the fuel tank, fuel may overflow when it expands.
Expanding is due to heat from engine or sun. Overheated fuel could
easily catch fire.
Stop adding fuel when the fuel level reaches the bottom of the filler
neck.
Fuel Valve operation
ON: With the handle of the fuel valve to "ON" position, the fuel supply
will flow to the carburetor. In this position the engine is able to start
and run.
OFF: With the handle of the fuel valve to "OFF" position, the fuel
supply is cut off to the carburetor. In this position the mini bike will
not start and will not run.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.
Filler neck
Fuel Valve Handle
ON
OFF