Checking & Cleaning Air Filter - Yukon Trail Badger 100 Owner's Manual

CHECKING & CLEANING THE AIR FILTER
1. Locate Air Filter Box at rear of engine
2. Remove air filter cover by unscrewing Phillips head screw
3. Remove foam Air filter element.
4. Tap Air filter element gently to remove most of the dust and dirt.
5. Wash foam element per instructions below then allow to dry
thoroughly.
6. Reinstall foam air filter element.
7. Reinstall air filter cover
CAUTION
The air filter element must be intact or the engine will suck in dust
and dirt, resulting in a shorter service life of the engine.
Water should be prevented from entering into the filter when
washing the vehicle.
The filter element shall be cleaned gently without twisting to
prevent it from cracking. Never wash it with gasoline or any acid,
alkaline or organic volatile oil to avoid its aging, which will result in
reducing the effect of the air filter oil to catch particles before they
enter the engine. Replace the filter element with a new one if it is
broken or cracked.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.