Table of Contents
Advertisement
INSPECTION AND MAINTENANCE
CHECKING THE OIL
Check engine oil each time prior to operating mini bike.
The oil level should be between upper and lower lines of oil gauge.
1. Set the Mini Bike on level ground, screw off the oil gage plug, wipe
the oil gage rod clean and then insert the gage plug into the
crankcase again to check the oil level. There is no need to screw
the oil gage plug completely in the hole to check the oil.
2. Add lubricating oil up to the edge of the fuel plug.
3. Screw oil gage plug tightly.
CAUTION
Never start the engine when
there is insufficient lubricating
oil. Otherwise, it will cause
harm to the engine.
Lubricating Oil Recommended
The lubricating oil is an important factor affecting the
performance and service life of the engine. Please refer to the
chart for the correct grade of engine oil based on the
environmental conditions in your area. Do not use any other type
of oil other than what is recommended in the chart. DO NOT MIX
OIL WITH THE GASOLINE.
.45L (.40qt) Oil
Lubricating oils of
different viscosity shall
be employed in different
regions and at different
temperatures.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.
Oil dip stick
Hide quick links:
Advertisement
Table of Contents
