Check-Ups, Adjustment And Maintenance - Yukon Trail Puma 200 Owner's Manual

CHECK-UPS, ADJUSTMENT AND MAINTENANCE

Checking the Oil
Check the engine oil each time prior to operating the mini bike.
The oil level should be between the upper and lower lines of the oil
gauge.
1. Set the Mini Bike on level ground, screw off the oil gage plug, wipe
the oil gage rod clean and then insert the gage plug into the
crankcase again to check the oil level. There is no need to screw
the oil gage plug into its hole in the crankcase.
Lubricating Oil Recommended
The lubricating oil is an important factor affecting the performance
and service life of the engine. Please refer to the chart for the correct
grade of engine oil based on the environmental conditions in your
area. Do not use any other type of oil other than what is
recommended in the chart. DO NOT MIX OIL WITH THE GASOLINE.
Lubricating oils of different viscosity shall be employed in different
regions and at different temperatures.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.