Disabling Or Enabling Attached Audio Devices - ViewSonic SC-T45 User Manual

Sc-t45 user guide m region (english)

Hide thumbs Also See for SC-T45:

Table of Contents

3.3.4 Disabling or Enabling Attached Audio Devices

To disable/enable attached audio devices, please do the following:

NOTE

• If you disable locally attached audio devices, client users are not allowed to

perform audio playback or recording with these devices in a Remote Desktop

session.

• To perform audio playback or recording with local audio devices in a Remote

Desktop session, you need to enable locally attached audio devices here (the

Audio setting item under Devices tab) and configure audio related settings

in the RDP connection settings. For detailed instructions on how to configure

audio related settings in an RDP connection settings, please refer to section

"3.5.5 Configuring Advanced RDP Connection Settings" on page 38.

1. On ViewSonic Client Setup, click Devices > Audio.

2. Click to check/uncheck Enable System Audio Device.

3. Click Save to confirm your selection.

NOTE

• The change will not take effect until the client has been restarted.

Configuring Client Settings

Configuring External Device Settings

Table of Contents