Table of Contents
Advertisement
Overview
LED Indicators
1.6 LED Indicators
Your SC-T45 is equipped with a Power LED to indicate the state of power. The meanings of LED signals
are described as follows:
LED
Power LED
The LAN port of your SC-T45 has two LED indicators showing the state of networking. The meanings of
LED signals are described as follows:
Left LED
(transmission rate)
LED Signal
Orange
Green
1.7 Before Getting Started
About FBWF (File-Based Write Filter)
Before getting started on client configuration through the ViewSonic Client Setup software or through the
Windows Embedded Standard operating system, please note that any changes to the system in a session
will not be kept by default after the system restart. This is due to a special feature called FBWF (File-Based
Write Filter) in your Windows Embedded-based system.
You can change the default via the ViewSonic Client Setup software. It's strongly recommended that you
read the related section in this ViewSonic Client Setup User's Manual first before making any changes to
your system.
WARNING
• Please read the following section
system: "3.2.8 Configuring FBWF (File-Based Write Filter)" on page 27.
About Default User Accounts
There are two default user accounts for your Windows Embedded-based system: one is the standard, the
other administrative. The default credentials are shown as follows:
Type
Administrator
Standard user
NOTE
• The passwords are case sensitive.
Signal
Meaning
Off
The client is off.
Blue
The client is on.
Right LED
(transmission activity)
Off
Off
Off
Amber blinking
Amber blinking
Amber blinking
Account Name
Administrator
User
Meaning
The client is not connected to a LAN.
The client connects to a 10 Mbps LAN.
The client connects to a 100 Mbps LAN.
The client connects to a 1000 Mbps LAN.
FIRST
before making any changes to your
Password
Administrator
User
6
Advertisement
Table of Contents
