Positioning Your Sc-T45 - ViewSonic SC-T45 User Manual

Sc-t45 user guide m region (english)

Hide thumbs Also See for SC-T45:

Table of Contents

2.1 Positioning Your SC-T45

There are two ways to position your SC-T45:

•

Put it (with its stand) on a desk or a desired place uprightly.

•

Mount it on the back of a monitor using a VESA mount kit.

To mount your SC-T45 on the back of a monitor, please follow the steps below:

Step 1:

Remove the Stand from Your SC-T45

Step 2:

Understand Your Stand / VESA Mount Kit for SC-T45

Step 3:

Store Away Screws inside the Bracket

Step 4:

Remove Screws from the Bracket

Step 5:

Mount Your SC-T45

Step 1: Remove the Stand from Your SC-T45

To remove the stand from your SC-T45, please do the following:

1. Place your SC-T45 on a flat surface with the stand side upward.

2. Remove the screw that fixes the stand to your SC-T45.

3. Store away the removed screw inside the stand. Detailed instructions will be

provided in

Step 2

and 3.

NOTE

• It's highly recommended to store screws away inside the stand when not

needed

to prevent them getting lost.

Setting Up Your SC-T45

Positioning Your SC-T45

Table of Contents