Table of Contents
Advertisement
4.3. EDID menu
4.3.1. EDID Router operation
By clicking on the EDID menu, the EDID router window appears.
When the user enters the menu for the first time, the software starts to download
the whole EDID content from the DA2DVI-Pro. It may take about 10-20 seconds.
After the list is downloaded, the current status of the EDID list is shown in two
windows (list window areas). In the drop-down menus above the two windows you
can select which part of the EDID memory you want to see.
The Emulated EDID List window contains the resolution, manufacturer and vendor
name of the EDID emulated or reported to the source. The source column displays
the memory location that the current EDID was routed from.
The Last attached Monitor's EDID List window contains the resolution,
manufacturer and vendor name of the display device connected to DVI OUTPUT 1.
The Factory EDID List window shows the fifty factory preprogrammed EDID.
The User EDID List shows the memory locations which can be used by the user to
save EDID.
Change emulated EDID at the input – Drag and Drop
The two main types of the emulation are the static and the dynamic:
Static EDID emulation:
Dynamic EDID emulation:
Page 20 / 43
List window areas
when an EDID from memories 1...100 is selected and
emulated at the input(s)
when an attached monitor's EDID is emulated at
input(s), simply copying the data from the monitor.
This EDID changes immediately and automatically, if
a new monitor is attached to the output.
Advertisement
Table of Contents
