Table of Contents
Advertisement
6.3. There is no input signal
Check the source
Check whether your source is powered on and configured properly. If the source is
a computer, then verify that the DVI output is selected and active. Try restarting
your computer; if you get a picture during the booting process, you have to review
the graphics card's driver settings in the operating system.
Check the EDID
Maybe the data rate is too high for that type of cable. Try switching another EDID
to the inputs with lower resolution. If the source is a computer and you are an
expert user, you can try modifying the refresh rate, so you would be able to get it to
work at higher resolutions over a noisy connection.
DA2DVI-Pro
User's Manual Rev. 1.3
Page 37 / 43
Advertisement
Table of Contents
Need help?
Do you have a question about the DA2DVI-Pro and is the answer not in the manual?
Questions and answers