Lightware DA2DVI-Pro User Manual page 33

Step 2. Click on FIND button. The bootloader lists every Lightware device on the
Info: You must wait until every device boots up completely before pressing FIND button.
Step 3. Double click on the COM port that the DA2DVI-Pro is connected to. The
Ethernet and available COM ports of the computer.
bootloader cannot identify the devices on the COM ports so if you are
unsure about which virtual COM port the DA2DVI-Pro is connected to,
run the Matrix Controller software and check.
DA2DVI-Pro
User's Manual Rev. 1.3
Page 33 / 43