Table of Contents
Advertisement
4.8.7. View EDID validity table
Description: Shows EDID validity table, which contains information about the
EDID states.
If a changed EDID is queried by the wh command (see the next section), its value
returns to '1'.
Format:
Example:
Legend:
4.8.8. View EDID header
Description: EDID_HEADER consist of 3 fields:
PNPID code
Preferred resolution
Name
Format:
Info:
The EDID of DVI INPUT is mapped to logical address 133
Example:
Legend:
4.8.9. Upload EDID content from the DA2DVI-Pro
Description: EDID hex bytes can be read directly. The DA2DVI-Pro will issue the
whole content of the EDID present on memory location <loc> (256 bytes).
Format:
Page 28 / 43
→ {wv}
← (EV●VALIDITY_TABLE)CrLf
→ {WV}
← (EV11111111111111111111111111111111111111111111111111
00033011000000000000000000000000000000000000000000133111
11111111111111111111111111111111111111331111111111111111
11)CrLf
0
invalid EDID
1
valid EDID
3
changed EDID
The three letter abbreviation of the manufacturer
The resolution and refresh rate stored in the preferred
detailed timing block.
The name of display device stored in product descriptor.
→ {wh<loc>}
← (EH#<loc>●EDID_HEADER)CrLf
Show the emulated EDID on DVI INPUT.
→ {WH133}
← (EH#133 NEC 1600X1200@60 LCD2170NX)CrLf
EDID Manufacturer:
Preferred resolution:
Display device's name:
{we<loc>}
→
(EB#<loc>●B1●B2●..B256)CrLf
←
NEC
1600x1200@60
60 LCD2170NX
Advertisement
Table of Contents
