Onboard Control Menus - Martin MAC 101 User Manual

Onboard control menus

Menu
DMX ADDRESS
CONT MODE
PERSONALITY
FACTORY
SETTING
INFO
TEST
Item Options
1 – 501 (RAW/RGB)
1 – 505 (BASIC)
RAW
RGB
BASIC
P/T SPEED
SWAP
P/T SETTING
PAN INVERT
TILT INVERT
REGULATED
FANS
FULL
LINEAR
SQUARE LAW
DIMMER
INV SQUARE
CURVE
LAW
S-CURVE
OFF
DMX RESET
ON
ON
2MN
DISPLAY
5MN
10MN
DISPLAY
10-100
INTENSITY
NORMAL
ERROR MODE
SILENT
FACTORY
LOAD
DEFAULT
VERSION
RESETTABLE
POWER ON TOTAL
HOURS
CLEAR
RESETTABLE
CURRENT
MAIN PCB SINCE RESET
TEMP
TOTAL
CURRENT
SINCE RESET
PIXEL TEMP
TOTAL
RDM
SERIAL
FIXT SERIAL
NUMBERS
NUMBER
TEST ALL
TEST LED
TEST PAN & TILT
TEST DISPLAY
Table 3: Control menu
Onboard control menus
Notes (Default settings in bold print)
DMX address (default address = 1). The DMX address
range is limited so that the fixture will always have
enough DMX channels in the 512 available.
RGB raw DMX control mode
RGB calibrated DMX control mode
Basic DMX control mode
Pan and tilt speed normal / fast / slow
Swap pan and tilt (pan commands move tilt and vice
versa) - off / on
Pan inversion (reverse direction pan control) - off / on
Tilt inversion (reverse direction tilt control) - off / on
Cooling fan speed thermostatically regulated
Max. cooling fan speed
Linear dimming curve
Square law dimming curve
Inverse square law dimming curve
S-curve dimming curve
Disable reset via DMX
Enable reset via DMX
Display is always on
Display switches off and goes into Sleep mode if the
controls have not been pressed for 2 minutes.
Display switches off and goes into Sleep mode if the
controls have not been pressed for 5 minutes
Display switches off and goes into Sleep mode if the
controls have not been pressed for 10 minutes
Display intensity. Default=100
Display errors at 100% intensity (regardless of
DISPLAY INTENSITY setting) and illuminate the
service light.
Silent error mode. The error message does not appear in
the display, but the service lamp is illuminated
Return all settings (except calibrations) to factory
defaults
NB: can take up to 2 minutes to complete!
CPU firmware version
Hours of operation since counter reset
Total hours of operation since manufacture
Reset resettable counter to zero
Display current main PCB temperature
Display highest main PCB temperature since last reset
Display highest main PCB temperature since
manufacture
Display current average LED temperature
Display highest average LED temperature since last
reset
Display highest average LED temperature since
manufacture
Display fixture's RDM ID
Display fixture's serial number
Test LEDs and pan/tilt movement
Test LEDs only
Test pan/tilt movement only
Test all segments in onboard display panel
23