Setting Outer Seat In The Transverse Direction; Folding Rear Seats Back Into The Initial Position - Skoda Yeti 2015 Operating Instructions Manual

Note
The outer seats are not mutually interchangeable. In the rear area the left seat
is marked with the letter L and the right seat with the letter R.

Setting outer seat in the transverse direction

›
Remove the middle seat » page
›
Fold the outer seat forwards » page 84
›
Move the folded forward and unlocked seat on the guide towards the middle
of the vehicle up to the stop.
›
Lock the folded forward seat by pressing the seat locks
arrow » Fig. 72.
Folding back into the starting position is accomplished in the reverse order.

Folding rear seats back into the initial position

›
If the seat has been removed, first position it on the guide and lock it in place
using seat locking » Fig. 72 on page 85 .
A
›
Pull the seat upwards to ensure that the seat is locked correctly.
›
Fold the seat in the horizontal position until it can be heard to click.
›
Check for yourself that the seat can no longer be lifted by pulling it up.
Fig. 72
Locking seats
84, Unlocking and removing seats.
and unlock » Fig. 71 on page 84.
in the direction of
A
Fig. 73
Folding the seat backrest back
into position
›
Press the lever in direction of arrow
rest to its original position in the direction of arrow
›
Check for yourself that the seat backrest is engaged by pulling on it.
›
Remove the tongue of the lock from the safety position.
WARNING
The belt locks must be in their original position after folding back the seat
■
cushions and backrests - they must be ready to use.
The seat backrests must be securely engaged so that objects from the
■
boot cannot slip into the passenger compartment on sudden braking – risk
of injury!
When folding the seat backrest always make sure that it has safely
■
locked into position, this is confirmed by the position and a visible marking
on the cover of the lever.
» Fig. 73 and fold back the seat back-
1
2.
Seats and head restraints
85