Manually adjusting seats
Read and observe
on page 77 first.
Control elements on the seat
» Fig. 59
Adjusting a seat in a forward/back direction
A
Adjusting height of seat
B
Adjusting the angle of the seat backrest
C
Adjusting lumbar support
D
Adjusting a seat in a forward/back direction
›
Pull the lever
» Fig. 59
in the direction of the arrow and push the seat in
A
the required direction.
The lock must click into place after you release the lever.
Adjusting height of seat
›
Again push or pull the lever
B
Adjusting the angle of the seat backrest
›
The seat back release (do not lean on).
›
Push the lever
» Fig. 59
in the direction of one of the arrows.
C
Adjusting lumbar support
›
The lever
» Fig. 59
in direction of arrow.
D
78
Using the system
Fig. 59
Control elements on the seat
» Fig. 59
in the direction of one of the arrows.
Adjusting the front seats electronically
Fig. 60 Control elements on the seat
Read and observe
on page 77 first.
Control elements on the seat
» Fig. 60
seat adjustment
A
Adjusting the angle of the seat backrest
B
Adjusting lumbar support
C
Adjusting a seat in a forward/back direction
›
Push the switch
in the direction of one of the arrows 1
A
Adjust the angle of the seat cushion
›
Push the switch
in the direction of one of the arrows 2
A
Set the height of the seat cushion
›
Push the switch
in the direction of one of the arrows 3
A
Adjusting the angle of the seat backrest
›
Push the switch
in the direction of one of the arrows 4
B
Raising or lowering the curvature of the lumbar support
›
Push the switch
in the region of one of the arrows5
C
Reducing or increasing the curvature of the lumbar support
›
Push the switch
in the region of one of the arrows6
C
The adjusted driver's seat position can be set in the memory of the seat
» page 79
or the remote control key
Note
If the setting procedure is interrupted, you will need to press the button again.
» Fig.
60.
» Fig.
60.
» Fig.
60.
» Fig. 60
.
» Fig.
60.
» Fig.
60.
» page
79.