Adjusting the front seats - Version 1
First read and observe the introductory information and safety warn-
ings
on page 52.
›
Pull the lever
» Fig. 38
up and push the seat into the desired position.
1
›
Release the lever
and push the seat until the lock clicks into place.
1
Adjusting height of seat
›
To lift the seat, pull or pump the lever
›
To lower the seat, push or pump the lever
›
To adjust the angle of the backrest, relieve any pressure from the seat backrest
(do not lean on it) and turn the handwheel
Adjusting the front seats - Variant 2
Control elements at the seat
» Fig. 38
upwards.
2
downwards.
2
» Fig.
38.
3
Control elements at the seat
First read and observe the introductory information and safety warn-
ings
on page 52.
Adjusting a seat in a forward/back direction
›
Pull the lever (in the middle area)
sired position.
›
Release the lever
and push the seat until the lock clicks into place.
1
Adjusting height of seat
›
To lift the seat, pull or pump the lever
›
To lower the seat, push or pump the lever
Adjusting the angle of the seat backrest
›
Remove the load on the seat backrest (do not lean on it), pull the lever
» Fig. 39
towards the rear and set the desired angle of the seat backrest
3
with the back.
›
After releasing the lever
, the seat backrest will remain in the set position.
3
Front seat heating
First read and observe the introductory information and safety warn-
ings
on page 52.
The seat backrests and seats can be heated electrically.
›
By pressing the rocker switch in the position 1 or 2 switch on the front seat
heating to 25 % or 100 % of its power output
›
To switch off the heating shift the rocker switch into the horizontal position.
» Fig. 39
up and push the seat into the de-
1
» Fig. 39
upwards.
2
downwards.
2
Fig. 40
Rocker switch for front seat
heating
» Fig.
40.
Seats and storage
53