Climatronic (Automatic Air Conditioning) - Skoda Yeti 2015 Operating Instructions Manual

Note
The warning light in the button  lights after activation, even if not all of
■
the conditions for the function of the cooling system have been met. By light-
ing up of the indicator light in the button, the operational readiness of the
cooling system is signalled.
During operation of the air conditioning, an increase in engine idle speed may
■
occur under certain circumstances in order to ensure sufficient heating com-
fort.

Climatronic (automatic air conditioning)

Fig. 117 Controls the Climatronic

Read and observe and
The Climatronic in automatic mode ensures the best-possible setting of the
temperature of the out-flowing air, the blower stage and air distribution.
The system also takes sunlight into account, which eliminates the need to al-
ter the settings manually.
Individual functions can be set off or on by turning the knob or pressing the
respective button. When the function is switched on the warning light illumi-
nates in the button.
Functions of the individual controls
Adjust the temperature for the left side or for both sides
A
›
Lower temperature

›
Increase temperature

Interior temperature sensor
B
110
Using the system
on page 106 first.
» Fig. 117
Depending on equipment fitted:
C
›
 Switching the windscreen heater on/off
›
 Switching on/off aux. heating (standard heating) on/off
Adjust the temperature for the right side
D
›
Lower temperature

›
Increase temperature

Control the seat heater on the front left seat

Control the seat heater on the front right seat

Adjust the blower speed

›
+ Increase speed
›
- Reduce speed
Switch the intensive windscreen heater on/off

Air flow to the windows

Air flow to the upper body

Air flow in the footwell

Automatic recirculation, switch on or off

Switching the rear window heater on/off

Switching automatic mode on

Switching Climatronic system off

Switching the cooling system on/off

Switch the temperature setting in Dual mode on/off

After the cooling system is switched off, only the ventilation function remains
active whereby the minimum temperature that can be reached is the outside
temperature.
Setting temperature
The interior temperature for the left and right side can be set separately or to-
gether.
The temperature for both sides, is set by turning the knob
indicator light in the button  is not illuminated).
The temperature for the right side is adjusted by turning the knob
dicator light in the button  is lit).
The temperature for the left side is adjusted by turning the knob
cator light in the button  is lit).
The interior temperature can be set between +18 °C and +26 ℃. The interior
temperature is regulated automatically within this range.
» page 72
» page 112
» page 80
» page 80
» page 108
» page 72
»
» Fig. 117
A
D
(the indi-
A
(the
(the in-
