Table of Contents
Advertisement
When automatic storage is activated, the current positions of the driver's seat
and the external mirrors are saved in the memory of the remote control key
each time the vehicle is locked. When the vehicle is next unlocked using the
same key, the driver's seat and the external mirrors assume the positions stor-
ed in the memory of this key
.
1)
Saving front passenger mirror settings when reversing
Above the MAXI DOT display in the menu item Mirror down The lowering func-
tion for the mirror on the passenger side when reversing must be enabled
» page
48.
›
Unlock the vehicle with the respective remote control key.
›
Switch on the ignition.
›
Turn the knob for the external mirror control to the position for the passen-
ger side mirror adjustment
» page
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position
›
Disengage reverse gear.
The adjusted position of the exterior mirror is stored in the remote control key
memory.
Disable the function of automatic storage
›
Unlock the vehicle with the remote control key.
›
Press the button (Position
A
time, press the button
on the remote control key within 10 seconds.
The successful deactivation of the automatic storage function for each key is
confirmed by an acoustic signal.
Stopping the ongoing adjustment
›
Press any button on the driver's seat.
Or
›
Press the button
on the remote control key.
1)
The vehicle must be locked and unlocked with the same key to save the seat and exterior mirror position
to the key.
80
Using the system
76.
» page
» Fig. 61
on page 79) and hold. At the same
Front seat functions
Introduction
This chapter contains information on the following subjects:
Front seat heating
Front armrest
Folding front passenger seat
Front seat heating
76.
The seat backrests and seats can be heated electrically.
The seat heating can only be switched on when the engine is running.
Buttons for the seat heater
Left seat heating
Right seat heating
Switching on
›
Press the corresponding symbol button or
Pressing once switches the seat heating on at its maximum level.
With repeated pressing of the switch, the intensity of the heating is reduced
until it is switched off.
The level of the seat heating is indicated by the number of illuminated warning
lights in the switch.
Fig. 62
Buttons for heating the front
seats
» Fig. 62
» Fig.
62.
80
81
81
Advertisement
Chapters
Table of Contents
