Figure 15 Input Status Screen; Figure 16 Dc Bus / Battery Status - Liebert 30-130kVA Operation And Maintenance Manual

Detailed Information Reports
Detailed information reports are available through the following numbered blocks
1. INPUT STATUS. To access this screen, start with the Mimic Display Screen. Using the arrow
keys, bracket INPUT and press SELECT. The screen displays the UPS input voltage and current
as well as additional information. Press SELECT to return to the Mimic Display Screen.
NOTE
On the Mimic Display Screen, items are bracketed instead of highlighted so as not to confuse
highlighting with power pathways.

Figure 15 Input status screen

V
I
NOTE
All voltage readings are phase-to-phase measurements (A-B, B-C, and C-A). All current
readings are phase measurements (A, B, and C). The metered parameter values on the
following screens are updated at one-second intervals
The Input Status screen displays the following real-time data:
• Input AC Volts AB, BC, CA
• Input Current A, B, C
• Input Frequency
• Inlet Air Temperature
• Outlet Air Temperature
• Heat Sink Temperature (100 and 130 kVA will display 3 temperatures, 1 for each heatsink)
2. DC BUS / BATTERY. By highlighting and selecting BATTERY from the Mimic Display Screen,
the following screen comes up, displaying DC bus voltage and the charge or discharge current.
This screen also shows BATTERY TEMPERATURE. Press SELECT to return to the Mimic
Display Screen.

Figure 16 DC bus / battery status

INPUT STATUS
A B
L - L 209 209
37 37
DC BUS / BATTERY STATUS
NUMBER OF BATT. ONLINE
DC BUS VOLT
BATT VOLT
BATT CURR
BATT TEMP
LAST BATTERY TEST : 07/07/02
C FREQ. 60.0
210 TEMPS (DEG C)
35 INLET AIR 24
OUTLET AIR 27
HEAT SINKS
1:025 2:020
540
472
4.1 (CHG)
25 C
24
Operation
HZ
3:020
1