Figure 45 Time Setting Screen; Figure 46 System Settings, Page 2 - Liebert 30-130kVA Operation And Maintenance Manual

Time
To set the system's real time clock, do the following:
1. From the System Configuration screen, press the Up or Down button to move the highlighted
cursor to TIME.
2. Press SELECT. The TIME screen will appear.
3. Press SELECT to move the arrow to the next digit to the right.
4. When the arrow is on the digit to be changed, press the Up or Down button to increase or decrease
the hour/minute/ second number. Press SELECT to set the value and move to the next digit.
5. After the correct hour/minute/second has been set, press SELECT again to return to the System
Configuration screen.
NOTE
1. Precise Date and Time functions are required for accurate archival and event history
purposes.
2. Both the Date and Time can be set from a remote terminal. Refer to Section 3.5 -
Communication Interfaces.

Figure 45 Time setting screen

Figure 46 System settings, page 2

To continue configuring the system, highlight NEXT and press SELECT.
CURRENT TIME
SYSTEM SETTINGS
ORDER NUMBER
SYSTEM CONFIG
SYSTEM / MODULE
NUMBER OF MODULES IN SYSTEM
NUMBER OF BATTTERY CABINETS
PREV. CANCEL
NEXT
00000000
SMS
1
1
1
SAVE & EXIT
41
Operation