Table of Contents
Advertisement
Monaco Installation and Operation Manual
Appendix 6: Refractory Replacement
The intense heat of the fire will normally cause hairline cracks in the refractory. These
cracks can be minimized by proper curing as described in "First Fires". They will not
normally diminish the effectiveness of the refractory. If large cracks develop, then the
refractory should be replaced. To replace the refractory bricks, follow these steps:
1. Remove all bricks (A) surrounding
the combustion chamber.
2. Remove brick (D) and the andiron
(C) held in place by the two torx
screws (B). Use a ratchet and a T-
30 socket.
93
Advertisement
Table of Contents
