Table of Contents
Advertisement
Monaco Installation and Operation Manual
Note that secondary air tubes can be replaced without removing the baffle board.
Important Notes:
The air tubes are identified for placement as follows:
Model
MONACO fireplace
92
3. Insert a cotter pin in the
last hole on the right
side of the tube. Then
bend the tabs on the
pin to keep in place.
4. Repeat steps 1, 2 and
3 for the two tubes in
the back then install
the baffle. Then, install
the two front tubes.
5. To remove the tubes
use the above steps in
reverse order.
Type of tube
Front ► 95 holes of 0.141"
Middle front ► 67 holes of 0.125''
Middle rear ► 67 holes of 0.109''
Rear ► 67 holes of 0.101''
Advertisement
Table of Contents
