Table of Contents
Advertisement
Monaco Installation and Operation Manual
Note: Only remove the knock-out that will be connected to the fresh air inlet.
To install a fresh air intake to the fireplace, the purchase of accessory AC03500 adapter is
required (sold separately).
The fresh air intake kit may be installed on three different places on the fireplace.
1- On the right side of the appliance (most common).
2- On the right side, at the back of the appliance.
3- On the right side under the appliance.
86
(1) Using a Philips screwdriver,
remove
the
holding the rectangular plate
on
the
(A)
fireplace jacket. If the location
2 or 3 has been chosen, use
pliers to remove the knock-
out.
(2) Secure the fresh air intake kit
adapter (B) on the fireplace
jacket using the 4 screws
provided with the kit.
four
screws
right
of
the
Advertisement
Table of Contents
