2—Verify Camera Operation
Lan Settings
Step 1
Click LAN Settings. The screen
at the right will be displayed.
Step 2
Enter the Hostname, Gateway,
IP Address, and Netmask that
are appropriate for the local
area network. Then click Save.
A message will appear indicating the IP address has been changed and the browser
will no longer be able to communicate with the camera. You must connect the camera
to an appropriate local area network (LAN) and connect to the camera using its new
IP address.
2-6
March 2010
F-Series Installation Manual
427-0030-00-12, version 110