Table of Contents
Advertisement
Installing the Backplane
Installing the Backplane into the Chassis
1. Ensure that all of the hard drive carriers have been removed from the bays in
the front of the node (see Section 6-5 Installing and Removing Hard Drives).
2. Ease the backplane forward, against the front of the chassis.
3. Align the mounting holes in the backplane with the holes in the chassis.
Replace the four screws at the top of the backplane
4. Reconnect all cables and return the hard drive trays to their bays in the front
of the motherboard node.
(Your node and backplane may differ from the one shown in this illustration)
Figure 6-11: Installing the Backplane
1
2
6-13
Chapter 6: Advanced Chassis Setup
1
3
Advertisement
Table of Contents
