Table of Contents
Advertisement
Appendix B: System Specifi cations
Appendix B
System Specifi cations
Note: Unless noted specifi cations apply to a complete system (all serverboards).
There are eight motherboard drawer nodes per system.
Processors
Two E5-2600 series processors per node in Socket R LGA 2011 type sockets
Note: please refer to our website for details on supported processors.
Chipset
One C602 chipset per node
BIOS
128 MB AMI BIOS® Flash EEPROM per node
Memory Capacity
The X9DRFR has sixteen (16) DIMM slots supporting up to 512 GB of
DDR3-1600/1333/1066/800 MHz speed RDIMM/LDIMM registered ECC or
128 GB of DDR3-1600/1333/1066/800 MHz speed UDIMM SDRAM in up to
1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.35V or 1.5V voltages per
node.
Note: refer to Section 5-6 for details on installation.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory support
information.
SAS/SATA Drive Bays
Each node of the FatTwin F627R3-RTB+/R72B+ contains eight hot-swap drive
bays (six front, two rear) to house up to eight standard 3.5" SAS/SATA drives per
node for a total of thirty-two (32) drives.
PCI Expansion
The FatTwin F627R3-RTB+/R72B+ has 1x PCI-E 3.0 x16 low-profi le and
1x PCI-E 3.0 x8 micro low-profi le available per node.
Serverboard
X9DRFR serverboard (proprietary form factor)
Dimensions: (LxW) 19.44 x 6.80 in. (493.78 x 172.72 mm)
B-1
Advertisement
Table of Contents
