Table of Contents
Advertisement
1-1
Overview
The FatTwin F627R3-RTB+/R72B+ is a high-end server comprised of two main
subsystems: the SCF424AS-R1K28B 4U server chassis and the X9DRFR dual
processor serverboard in four hot-swap nodes. Please refer to our web site for
information on operating systems that have been certifi ed for use with the system
(www.supermicro.com).
In addition to the serverboard and chassis, various hardware components have been
included with the FatTwin F627R3-RTB+/R72B+ server, as listed below:
•
Heat Sinks
Four (4) 2U passive CPU heat sinks for rear CPU (SNK-P0048P)
Four (4) 2U passive CPU heat sinks for front CPU (SNK-P0048PS)
•
Four (4) Plastic air shrouds (MCP-310-42401-0B)
•
Eight (8) 80x80x38-mm chassis middle cooling fans (FAN-0129L4)
•
Four (4) Round 20" 20-to-20-pin ribbon front control cables (CBL-0047L)
•
Four (4) 4-pin 40-cm PDB-to-MB HF power cables (CBL-0480L)
•
SAS/SATA Backplane:
Four (4) Backplanes for two (2) 3.5" HDD (BPN-SAS-F424-A2)
Four (4) Backplanes for six (6) 3.5" HDD (BPN-SAS-F424-A6)
Eight (8) 29cm 30AWG SATA cables (CBL-0483L)
Thirty-two (32) hot-swap 3.5" HDD trays (MCP-220-00094-0B)
F627R3-RTB+ only:
Eight (8) 27-cm PBF cables for SGPIO (CBL-0157L-02)
Twelve (12) 81-cm SATA 30AWG cables (CBL-0481L)
Twelve (12) 55-cm 30AWG SATA-SATA cables (CBL-0484L)
F627R3-R72B+ only:
Four (4) SAS add-on cards (BPN-ADP-S2208L-H8IR-O-P)
Four (4) 23-cm, w/25.5-cm 30AWG Ipass-to-4 SATA cables (CBL-0118L-03)
Eight (8) 43-cm SATA round S-RA PBF cables (CBL-0226L)
Four (4) 27-cm PBF cables for SGPIO (CBL-0157L-02)
•
One (1) F418/F424 Rail set (MCP-290-41803-0N)
Chapter 1
Introduction
1-1
Chapter 1: Introduction
Advertisement
Table of Contents
