BEFORE SWITCHING ON THE SYSTEM
In order to mount the cable cover, push it on the left pre-mounted screws on
the back of the BEETLE /S (see arrows ).
Tools are not required for mounting the cover.
Basic settings
Ex works, the BEETLE /S is configured to your order. Your configuration
must be subsequently adapted to support supplementary devices such as
scanners. For more information, contact the Wincor Nixdorf branch office
responsible for your area.
Adjusting the loudspeaker
You can set the volume as desired by means of a menu in the BIOS Setup
(see BEETLE POS motherboard manual).
14
Close the cable cover by
by shifting the cable cover
from the inside onto the
right screws .