Command Line Options - Opticon H-32 User Manual

Update OS image
Copy the H-32OSxxxxx.IMG file in the H-32 or on a micro SD card that is inserted into the
H-32. In the H-32 open the Windows Explorer and go to the Windows folder. Tap the
UpdateOS application.
Tap the Select Image button and browse to the folder where the image is located, select
the image and click the Open button. Tap the Start Update button to proceed with the
update.
When the update completes the H-32 will automatically reboot. Now when the H-32 is
started it will set the registry items back as they were before the update. When the
registry is updated the H-32 will reboot again to make the registry changes final. When
the H-32 is now rebooted it is ready for use.
8.3.1

Command line options

The UpdateOS image tool has a few specific command line options. These options are
not accessible from the UpdateOS user interface to prevent accidental wipe of the H-32.
H32 User Guide 43