Page 1
USER'S MANUAL H-15AJ Ruggedized Hand Held Terminal. FEB/2009 Ver: 0.3...
Page 2
Opticon will repair or, at its opinion, replace products that prove to be defective in material or workmanship under proper use during the warranty period. Opticon will not be liable in cases where modifications are made by the customer.
Describe how to use all kinds of communication of the Terminal. Chapter 5: Software Application, Describe the installed applications on the Terminal For configuration of the barcode scan reader, refer to the Opticon Universal Menu Book. The Universal Menubook can be downloaded from www.opticon.com...
• Under no circumstance will Opticon be liable for any direct, indirect, consequential or incidental damages aging out of the use or inability to use both the hardware and software and/or any data loss, even if Opticon has been informed about the possibility of such damages.
• Do not discharge the batteries outside the H-15AJ series Terminal.. Do not use the battery in another device then the Terminal. or CRD-15 series cradles.
OPTICON User's manual H-15AJ 1.4 CE Statement Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE...
Page 10
OPTICON User's manual H-15AJ This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
Page 11
OPTICON User's manual H-15AJ autres dispositions pertinentes de la directive 1999/5/CE. Italiano Con la presente [nome del costruttore] dichiara che questo [Italian] [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski Ar šo [name of manufacturer / izgatavotāja nosaukums]...
Page 12
OPTICON User's manual H-15AJ [Finnish] equipment = laitteen tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska Härmed intygar [företag] att denna [utrustningstyp] står I [Swedish] överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
OPTICON User's manual H-15AJ 1.5 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
OPTICON User's manual H-15AJ IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting.
OPTICON User's manual H-15AJ 1.8 Product Labeling The Terminal has several labels as showed in Figure 1-1 and 1-2. Figure 1-1 Product Labeling (Front and side views) Label nr. Description LCD panel protection film Opticon logo Table 1-1 Front labeling...
Page 16
OPTICON User's manual H-15AJ Figure 1-2 Product Labeling (Rear view) Label no. Description Laser radiation warning label System and regulatory label Serial number and Configuration number Warranty seal Terminal Windows CE label Other regulatory label Table 1-2 Rear labeling 1-11...
OPTICON User's manual H-15AJ 1.9 System Specifications The H-15AJ detailed specifications as follows. Unless otherwise noted, all the specifications are subject to change without prior notification. H-15AJ - 416MHz Intel PXA270 32 bits RISC CPU Processor - 256MB Flash ROM...
1.11 Warranty and after service Should this Terminal require service, please contact your local reseller. In case of technical questions, send an email to support@opticon.com and provide information about the product name, the serial number (see chapter 1.7 "Product labeling" and/or chapter 3.2.3.1 "Information") and provide a detailed problem description.
2. Getting started 2.1 Check the package Open the package and check if no parts are missing or damaged: Figure 2-1 Package contents 1. H-15AJ Terminal 2. Standard battery pack (3.7VDC/1840mAh) 3. Spring Cord for Stylus 4. Stylus 5. Wrist Strap 6.
OPTICON User's manual H-15AJ 2.2 General View of the Terminal 2.2.1 Terminal front side view Figure 2-2 Terminal front view 2.2.2 Terminal back side view Figure 2-3 Terminal rear view 2-15...
Page 21
OPTICON User's manual H-15AJ Barcode reader LED “Green” color Successful reading indicator “Green” color Enable WLAN Module “Blue” color Enable Bluetooth Module Charge LED indicator “Red” color Charging battery “Green” color Battery fully charged LCM / touch panel User input on touch panel by stylus...
OPTICON User's manual H-15AJ 2.3 Charging the Battery Pack Before using the Terminal, install and charge the battery by executing the steps described in this paragraph. 2.3.1 Installing the battery pack 1. Turn both battery cover latches downwards and lift the battery cover away from the Terminal.
OPTICON User's manual H-15AJ Figure 2-6 Replace the battery cover 2.3.2 Charging with Cradle and Power Adapter 1. Put Terminal into Single Dock. 2. Plug in the connector of the power adapter to the Single Dock. 3. Connect the power cord to the power adapter.
OPTICON User's manual H-15AJ 2.3.3 Charging terminal and battery pack with Cradle a) Put the another battery pack into Cradle: 1. Connect the power cord to the power adapter 2. Plug in the connector of the power adapter to the CRD-15 3.
OPTICON User's manual H-15AJ 2.4. Handling the Terminal 2.4.1 Starting the Terminal Press the power key to turn ON/OFF the Terminal. If the Terminal does not power on, perform a cold boot, see chapter 2-7 Resetting. CAUTION: When a battery is fully inserted in Terminal for the first time, the Terminal powers on and boots automatically.
OPTICON User's manual H-15AJ To turn OFF the Terminal Press the power key again. This action does not actually turn off the Terminal, it only turns the Terminal into suspend mode. All running applications remain as you left them, until you press the power key again to resume operation of the Terminal.
OPTICON User's manual H-15AJ 4) The display will dim automatically, if you do not perform any operation for a specific period of time. This will help to save the battery power. You can set up the specific period of time to see chapter 2.7 as reference.
Page 28
OPTICON User's manual H-15AJ Main Fn + Main Function Function User configurable Default : None User configurable Default : None Power On/Off Internet Explorer Microsoft WordPad File Explorer Right Left Down Enter Soft Keyboard 文字 Space Menu Function change 2-23...
Page 29
OPTICON User's manual H-15AJ Main Fn + Main Function Function . (Point) Minus , . Table 2-2 Keypad list Reset Key Functionality Definition Press “ Reset ” button on the rear side Reset Key Warm Reset to warm reset Press “Power”, and “ Reset ” button + “...
Page 30
OPTICON User's manual H-15AJ Main Function Definition User configurable Configure its function by customer Default : None demand Configure its function by User configurable customer Default : None demand Main BarCode Scan Activates the scan function of PDT. Puts the terminal into and wakes Power On/Off the terminal from suspend mode.
Page 31
OPTICON User's manual H-15AJ Main Function Definition modes, When you press the key, the “ select list” icon appears at the desktop to indicate you to select. Press “CLR” to disable. The “TAB” function is to move the cursor to the next tab stop or the next control (on a form) The “Space”...
Page 32
OPTICON User's manual H-15AJ Main Function Definition Number key “0” Dot key and characters list, press .(Dot) “CLR” to back default mode This key confirms some characters Minus , . entry Table 2-4 Definition of main Function 2.4.7.1 Special Function by “Fn” + main Function The “Fn”...
OPTICON User's manual H-15AJ 2.5 Navigating the Display 2.5.1 Setting Time and Date In the Date/Time options, you can change the year, month, date, time, time zone, or select automatic adjust for daylight saving time. To set or change the date and time: 1.
OPTICON User's manual H-15AJ Use the keypad to enter alpha-numeric characters, Refer to “2.4.7 Using the keypad”. Use the stylus on the touch screen, Refer to “2.4.6 Using the stylus”. Select text in the same way you select the text on a PC. Use the stylus to...
OPTICON User's manual H-15AJ Command Bar Task Bar Figure 2-14 Task Bar & Command Bar 2.5.5 The Soft Keypad In applications that accept keypad input, the Soft Input Panel (SIP) can be used to enter data using the stylus. The SIP is a software, QWERTY-style keyboard.
Page 36
OPTICON User's manual H-15AJ 4) Select a network, tap the "Configure" button or double tap it to create a new profile SSID. 5) And setting encryption of the network then press " OK " button to commit it. 6) Finally, you can view the SSID of the active profile on State tab.
OPTICON User's manual H-15AJ Figure 2-23 WLAN Manager Figure 2-24 WLAN Manager 2.5.7 Reading bar codes, 1D laser version. To use the scanning function, complete the following steps: 1. If you have not already done so, remove the protective plastic film before using devices equipped with a 1D laser bar code reader.
OPTICON User's manual H-15AJ 1) Decrease the scanning distance to the bar code when scanning small bar codes. 2) Increase the scanning distance from the bar code when scanning large bar codes 3) The scanning area is visible by a red laser beam.
Page 40
OPTICON User's manual H-15AJ mode when system using battery power. This will save battery power when Terminal is not in use. Figure 2-25 Battery Tab Figure 2-26 Schemes Tab Figure 2-27 Schemes Tab-Battery Figure 2-28 Schemes Tab-AC Power 2-35...
OPTICON User's manual H-15AJ 2.6.2 Resuming Use the following method to resume (wake up the Terminal): Press <Power> key to suspend or resume (wake up). When a battery pack completely discharges while the unit is in suspend mode, the Terminal remains suspended until discharged battery condition is corrected.
OPTICON User's manual H-15AJ 3. Terminal settings 3.1 Introduction To view available options for Terminal setting, tap Start > Settings. Then, there are three items inside Settings: “Control Panel”, “Network and Dial-up” and “Taskbar and Start”. 3.2 Control Panel To view the Control Panel and settings you can modify by tapping Start >...
OPTICON User's manual H-15AJ 3.2.1 Bluetooth Device Properties ICON ITEM & FUNCTION “Scan Device” Tab: (Figure 3-2) Tap the Scan Device button to initiate a scan for Bluetooth devices. The Bluetooth manager lists the Bluetooth devices that it finds, see Figure 3-5. Table 3-1 described the Bluetooth Icons.
Page 44
OPTICON User's manual H-15AJ Figure 3-2 Bluetooth Manager Window Figure 3-3 Bluetooth Manager Window Figure 3-4 Bluetooth Manager Window Figure 3-5 Bluetooth Manager Window...
Page 45
OPTICON User's manual H-15AJ Figure 3-6 Bluetooth Enter PIN Window Figure 3-7 Bluetooth Manager Window Figure 3-8 Bluetooth Manager Window Figure 3-9 Bluetooth Manager Window...
Page 46
OPTICON User's manual H-15AJ Figure 3-10 Bluetooth Manager Window Figure 3-11 Bluetooth Manager Window Figure 3-12 Bluetooth Manager Window Figure 3-13 Bluetooth Manager Window Note: If the device to which the Terminal is bonding does not appear in the list, ensure it is turned on, in discoverable mode, and within range (30 feets / 10 meters) of the Terminal.
OPTICON User's manual H-15AJ Icon Description Unknown device icon Device is not defined Locked icon Device is locked and can not be bonded to. Not locked icon Device is not locked and can be bonded to. Bluetooth device icon Bluetooth device...
OPTICON User's manual H-15AJ 3.2.3 PC Connection ICON ITEM & FUNCTION “PC Connection” Tab: (Figure 3-17) Select the first checkbox to enable direct connections to the desktop computer. (Figure 3-17) Tap the “Change Connection…” button to modify the connection method from USB, IrDA, Bluetooth. (Figure 3-18) To exit the “Change Connection”...
OPTICON User's manual H-15AJ 3.2.4 Remove Programs ICON ITEM & FUNCTION “Remove Programs” Tab: (Figure 3-19) Only user installed programs can be removed. Select the program you wish to remove from the list and press “remove” button. Table 3-5 Remove Programs Figure 3-19 Remove Programs 3.2.5 Internet Options...
Page 51
OPTICON User's manual H-15AJ of the following by tapping the checkbox: Allow cookies Allow TLS 1.0 security Allow SSL 2.0 security Allow SSL 3.0 security Warm when switching across secure and insecure areas. “Advanced” Tab: (Figure 3-23) Modify the security settings as desired. You can enable any...
Page 52
OPTICON User's manual H-15AJ Figure 3-22 Internet Settings Figure 3-23 Internet Settings Figure 3-24 Internet Settings Figure 3-25 Internet Settings 3-11...
OPTICON User's manual H-15AJ 3.2.6 Keyboard ICON ITEM & FUNCTION “Repeat” Tab: (Figure 3-26) To change the amount of time between depressions before repetition starts, adjust the Repeat delay slider To change the repeat rate, adjust the Repeat rate slider.
Page 54
OPTICON User's manual H-15AJ memory is normally set to about 40MB with the reminder assigned to Program memory. Press the “OK” key on the Keypad. Note: the difference is occupied by OS between the RAM size in Information properties and total memory size of storage memory and program memory “Device Name”...
OPTICON User's manual H-15AJ Figure 3-29 System Properties Figure 3-30 System Properties 3.2.8 Stylus ICON ITEM & FUNCTION “Double-Tap” Tab: (Figure 3-31,Figure 3-32) Double-tap the checkerboard grip at a comfortable speed. Double-tap clapboard to test your settings. The function is OK if the figures are changed from Figure 3-31 to Figure 3-32.
OPTICON User's manual H-15AJ 3.2.9 Terminal Server Client Licenses ICON ITEM & FUNCTION “Terminal Server Client Licenses” Tab: (Figure 3-35) The section allow users can connect to Terminal Server, If the user has License. Table 3-10 Terminal Server Client Licenses...
Page 58
OPTICON User's manual H-15AJ Most phone lines are tone. To automatically disable call waiting, select “Disable call waiting by dialing”, select the appropriate number sequence in the list, or enter a new sequence. “Editing dialing patterns”: (Figure 3-39) Using the codes listed in the topic; revise the dialing patterns as needed.
OPTICON User's manual H-15AJ Figure 3-38 Dialing Properties Figure 3-39 Dialing Properties 3.2.11 Network and Dial-up Connections ICON ITEM & FUNCTION “Connection” Tab: (Figure 3-40) To create a “Dial-up Connection”: Double-tap the “Make New connection”. In the “Make New Connection” dialog box, enter a name for the connection.
Page 60
OPTICON User's manual H-15AJ Select “TCP/IP Settings”. In the “General” tab, ensure “Use Server-assigned IP address” is selected. In the “Name Servers” tab, ensure “Use Server-assigned addresses” is selected, and select “OK”. If you are unable to connect with these default settings, see your ISP or network administrator for specific TCP/IP information.
Page 61
OPTICON User's manual H-15AJ Figure 3-40 Network and Dial-up Figure 3-41 Network and Dial-up Connections Connections Figure 3-42 Network and Dial-up Figure 3-43 Network and Dial-up Connections Connections 3-20...
OPTICON User's manual H-15AJ 3.2.12 Barcode Scanner Setting NOTE: Before using Barcode Scanner, You need enable barcode on the taskbar first. ICON ITEM & FUNCTION “基本設定” Tab: (Figure 3-52) The factory default for Barcode is disable. You can set the function on this page.(Main Scan Key, Vibrator on…etc)
OPTICON User's manual H-15AJ 3.2.13 Password ICON ITEM & FUNCTION “Password Setting” Tab: (Figure 3-59) Enter the password In the “Confirm password “box, enter the password again. To require the password on startup, select “Enable password protection at power- on“. and/or select “Enable password protection for screen saver”...
OPTICON User's manual H-15AJ 3.2.15 Brightness ICON ITEM & FUNCTION LCD Brightness Tune the LCD brightness by tapping right-arrow & left-arrow. Can also tune the LCD brightness by pressing right-direction key or left-direction key of keypad. Amounts 6 steps: Every step have corresponding picture of itself.
OPTICON User's manual H-15AJ Figure 3-68 Brightness 3.2.16 Power ICON ITEM & FUNCTION “Battery” Tab: (Figure 3-69) Provide change level indicators for Main battery and Backup battery. Provide remaining power capacity of main battery. If a “Main Batteries very Low” warning message shows, the remaining battery life is around 30 minutes before Terminal shuts down.
Page 72
OPTICON User's manual H-15AJ Note: This ICON on the Task Bar shows that AC adapter provides the power to the Terminal and the Main Battery Charging Fully. The ICON on the Task Bar shows that AC adapter provides the power to the Terminal and charging the main battery.
OPTICON User's manual H-15AJ Figure 3-73 Main Battery Very Low 3.2.17 Fn-key Settings ICON ITEM & FUNCTION Fn-Key Setting: (Figure 3-74) Fn Key The Application Program of default setting Internet Explorer Microsoft WordPad File Explorer Reserved Reserved Fn+F1 Reserved Fn+F2...
Page 74
OPTICON User's manual H-15AJ Fn+”4“ Reserved Fn+”5“ Reserved Fn+”6“ Reserved Fn+”7“ Reserved Fn+”8“ Reserved Fn+”9“ Reserved Fn+”0“ Reserved Fn+”.” Reserved Fn+”-“ Reserved To assign your favorite application program to F1, F2, F3 hot keys. Choose one of F1, F2, F3 from pull-down list.(Figure 3-74) To tap “Browse…”...
OPTICON User's manual H-15AJ Figure 3-76 Fn-Key Settings Figure 3-77 Fn-Key Settings 3.2.18 Volume & Sounds Properties ICON ITEM & FUNCTION “Volume” Tab: (Figure 3-78) The factory default for Volume is the forth level. You can adjust the volume to your environment and comfort.
OPTICON User's manual H-15AJ Figure 3-78 Volume & Sound Figure 3-79 Volume & Sound 3.2.19 画面(Display Properties) ICON ITEM & FUNCTION “Background” Tab: (Figure 3-80) From the “Image” list, select an image you want as the background of the desktop.(Figure 3-80) To locate an image in another folder, select “Browse”.(Figure 3-81)
Page 77
OPTICON User's manual H-15AJ To save the scheme, select “Save”. In the “Save this color scheme as” box, enter a name for the scheme, and select “OK”. Select “Apply”. Table 3-20 Display properties Figure 3-80 Display properties Figure 3-81 Display properties...
OPTICON User's manual H-15AJ 3.2.21 所有者情報(Owner) ICON ITEM & FUNCTION “Identification” Tab: (Figure 3-87) Fill in or edit the data as desired. To have this information displayed when you start your device, select “Display Owner Identification” at Power On. To set up identification for remote networks, see Setting up identification for remote networks.
OPTICON User's manual H-15AJ Figure 3-89 Owner Properties 3.2.22 証明書(Certificates) Certificates are used by some applications for establishing trust and for secure communications. Certificates are signed and issued by certificate authorities and are valid for a prescribed period of time. Windows CE manages multiple certificate stores.
Page 81
OPTICON User's manual H-15AJ store, select “Import” (Figure 3-92). To view more details of the selected certificate, such as the expanded name or expiration date, choose “View”. To delete the selected certificate from the store, choose “Remove”. Table 3-23 Certificates...
OPTICON User's manual H-15AJ Figure 3-94 Certificates Figure 3-95 Certificates 3.2.23 端末情報(Information) The ”端末情報” includes five information’s. These are OS Version, SW Version, WLAN MAC address, Bluetooth ID and S/N. 端末情報 Figure 3-96 3-41...
OPTICON User's manual H-15AJ 3.2.25 Date/Time ICON ITEM & FUNCTION “Date/Time” Tab: (Figure 3-100) Please see the detail information of 2.5.1 Setting Time and Date Table 3-25 Date/Time Figure 3-100 Date/Time Settings 3.2.26 Input Panel ICON ITEM & FUNCTION “Input panel” Tab: (Figure 3-101) Select the input method you want to change.
OPTICON User's manual H-15AJ To exit the soft keyboard Options, press “OK” on the control bar, or press the <Enter> key on the keypad. To exit the Input Panel, press “OK” on the control bar, or press the <Enter> key on the keypad.
Page 86
OPTICON User's manual H-15AJ Figure 3-103 Taskbar and Start Menu Figure 3-104 Taskbar and Start Menu- General Figure 3-105 Taskbar and Start Menu- Advanced 3-45...
OPTICON User's manual H-15AJ 4. Communication 4.1 Installing & Setting Up Microsoft ActiveSync 4.1.1 Installing Microsoft ActiveSync on the Host PC Microsoft ActiveSync is a file transfer tool to synchronize the files on a PC with the files on your Terminal.
OPTICON User's manual H-15AJ synchronize information between the two computers. For more information on partnerships, please refer to your Microsoft ActiveSync documentation or help file. Transferring Files: To transfer files, complete the following steps on the host PC: Select Start> Programs > ActiveSync.
OPTICON User's manual H-15AJ the synchronization options. Place the file to be synchronized in the Synchronization folder created you’re My Documents directory. Defaults to the desktop. During the ActiveSync connection, all files in the Synchronization folder will be synchronized to the \My Documents directory on the Terminal.
OPTICON User's manual H-15AJ 5. Software Applications 5.1 Introduction The Terminal includes several applications for example email, Internet Explorer etc. You can switch to any software application by tapping the Start Menu. 5.2 Software Applications 5.2.1 Internet Explorer With Internet Explorer, you can view Web or intranet Web pages on your device.
Page 91
OPTICON User's manual H-15AJ 5.2.1.2 Start Internet Explorer Open Internet Explorer by selecting Start > Programs > Internet Explorer. To get default home page, navigate to the desired default web page. Select View > Internet Options from the command bar.
Page 92
OPTICON User's manual H-15AJ 5.2.1.6 Search for an Internet Site Select View > Go > Search to search the web. 5.2.1.7 Go to an Internet address Select Address Bar, if necessary to display the Address bar Enter the address Press “ENTER” key.
OPTICON User's manual H-15AJ To view the protocol, page type, size, and address, selects the General tab. To view security information about the page, select the Security tab. 5.2.1.14 View HTML source code While viewing the page, select File > Save As and save the file as .txt file.
OPTICON User's manual H-15AJ Talk instead of type Stop typing Talk with a colleague anywhere in the world using the microphone and speakers. Windows Messenger supports high-quality voice. Communicate using Session Initiation Protocol (SIP) or Hotmail contacts Windows Messenger supports. Communication with your colleagues in the enterprise with a SIP based communications service.
Page 95
OPTICON User's manual H-15AJ 5.2.3.1 Selecting and Editing Text Select text To select Do this Any amount of text Drag the stylus over the text. A word Double-tap the word. A single paragraph Triple-tap within the paragraph. Select Edit > Select All...
Page 96
OPTICON User's manual H-15AJ 5.2.3.2 Formatting Text Create bulleted and numbered lists Select the Bullets or Numbering button. Type the first item. Press ENTER, type the next item, and repeat as needed. Select the button again to end list formatting.
Page 97
OPTICON User's manual H-15AJ Indent a paragraph Select the paragraph you want to indent. Select Format > paragraph. Adjust the indentation settings as needed. Set tabs Select Format > Tabs. Change the tab settings as needed. 5.2.3.3 Adjusting the Display Wrap text in the window Select View >...
Page 98
OPTICON User's manual H-15AJ Select Tools > Insert Symbols. Select the symbol you want, and then select Insert. Tips: If you select a different font ( or subset of a font), a different set of Symbols will be displayed. 5.2.3.6 Printing a Document Select File >...
Page 99
OPTICON User's manual H-15AJ Borders and Shading Borders and shading are not displayed in WordPad, but are restored when converted back to a Word document. Shading is not restored when used in a table, but simple borders are restored. Character formatting Bold, italic, strikethrough, superscript, subscript, and hidden text are retained and displayed.
OPTICON User's manual H-15AJ Revisions marks, annotations, and comments Revision marks are visible but cannot be changed. Annotations and documents are removed during conversion. 5.2.4 Remote Connection Using Remote Desktop Connection, you can log on to Windows Terminal Server and use all programs installed on this server. For example, instead of running Microsoft Pocket Word, you can run the desktop version of Microsoft Word.
OPTICON User's manual H-15AJ 5.2.4.2 Disconnecting Without Ending a Session In the Remote Connection window, select Start > Shutdown. Select Disconnect > OK. Note: If you previously disconnected from a Terminal Server without ending the session, the Terminal Server will continue to execute any running...
Page 102
OPTICON User's manual H-15AJ 5.2.5.1 Navigating in File View Go forwards and Back To go to the previous folder, select Go > Back. To go to the next folder (which you have just viewed), select Go > Forward. Use the Go menu To quickly access the My Documents folder, select Go >...
OPTICON User's manual H-15AJ To receive a file, line up the infrared ports, and select File > Receive. 5.2.5.4. Creating Desktop Shortcuts Display the file or Web page for which you want to create a Shortcut. Select File > Send to.
OPTICON User's manual H-15AJ Figure 5-6 FlashDisk 5.3.3 FlashDisk Size The size of the FlashDisk will vary, depending on the size of system firmware. Inside the FlashDisk directory, tap File > Properties. The FlashDisk Properties dialog: The number following Free is the amount of memory currently available on your device.
Need help?
Do you have a question about the H-15AJ and is the answer not in the manual?
Questions and answers