Opticon H-32 User Manual page 26

Option
Enable barcode reader
Enable trigger key
Center, Left, Right
Output mode
Special suffix
Good read notification
H32 User Guide
Description
Enable or disable the barcode reader. Changing the checkbox
will show either an enabled or disabled barcode icon in the
tray bar.
Disable all the hardware trigger keys. A software trigger is
still possible.
With these checkboxes a single hardware trigger key can be
enabled or disabled.
Buffer, Keyboard or Clipboard.
Buffer – The scanned barcode data is available from software
SDK only.
Keyboard – The scanned barcode is outputted as if someone
is typing barcode.
Clipboard – Scanned barcode data is outputted as if a
clipboard copy done (CTRL+C, CTRL+V)
With the special suffix option a specific character is outputted
as a keystroke after the scanned barcode is outputted. This
option is not available when output mode is buffer.
With the good read notification user feedback of a scanned
barcode can set. This can be audio feedback or vibrator
feedback. When buzzer or buzzer and vibrator are selected
an audio file can be selected for good read feedback. The
selected setting can be tested by taping the confirm button.
Barcode data capture
26