The Command Bar; The Task Bar - Opticon H25 User Manual

2.5.2 Entering the Data
To select and open programs, select Start > Programs from the task bar to open a list of available programs. or if the program
has an icon on the desktop, double-tap to open it.
There are several ways to enter data on the Device once in an application:

Use the keypad to enter alpha-numeric characters, Refer to "2.4.6 Using the H25 keypad".

Use the stylus on the touch screen.

Select text in the same way you select the text on a PC. Use the stylus to highlight the desired text by dragging the stylus
across the desired text, double-tapping to select one word and triple-rapping to select an entire line/paragraph. Refer to
"2.5 Navigating the Display" starting.

Use the soft input panel (digital keyboard) with the stylus.

Use the bar code scanning to enter data. Press the trigger or "Barcode Scan" key to initiate a scan. The scanned data will
enter the current application's open file. Refer to "2.5.7 Reading barcodes, 1D laser version" starting for more infor-
mation on using a scanner.
For more information on factory installed applications, Refer to Chapter 5 " Software Applications".

2.5.3 The Command Bar

Use the Command bar at top of the screen to perform tasks in programs, such as opening a file, or editing a file.
Figure -16 Task Bar & Command Bar

2.5.4 The Task Bar

The Task bar at the bottom of the screen displays the icon, an icon for the active program, the current time, and system icons for
utilities loaded in memory. The Task bar includes menu names, buttons, and the keyboard icon, which opens and closes the soft
input panel (SIP). The Task bar allows you to select and close programs. Refer to Figure 2-12 to view the Task bar.
Command Bar
Task Bar
27