Page 2
Under all circumstances this manual should be read attentively, before installing and or using the product. In no event, Opticon Sensors Europe will be liable for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages.
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE INTRODUCTION This terminal is a pocket sized, programmable handheld terminal, and is well suited for a variety of portable applications. It has a built-in laser scanner that can scan all popular bar code labels at varying distances.
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE PHL1300: IRU1300: Terminal Cradle INSTALLATION 2.1 UNPACKING When you remove the packing, please check for any physical damage. We recommend that ADDITIONAL you save all packing material, as it should be IRU1300: used whenever you need to ship your terminal (eg.
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE 2.2.2 Details of terminal: 1. Reading window 9. Character keys definable by application laser beam for barcode reading will be typical use: for input of alpha-numeric and emitted from here punctuation characters 2.
Opticon RS232 cable 4. DIP switches setting parameters of the infrared interface. 5. Electrical contacts for power supply to terminal PHL1300 If rechargeable Li-Ion battery pack is inserted in the terminal the pack will be charged through the electrical contacts 6.
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE Use of the terminal 2.3 HANDLING PRECAUTIONS Avoid temperature changes. Sudden temperature changes To avoid malfunctioning and to ensure years can cause condensation to of trouble free operation, pay attention to the form on the terminal.
2.4.3. Terminal on cradle Take notice that the IRU1300 cradle is designed for the PHL1300 terminal. No other types of terminals can be placed into this cradle. Start with a full battery To be sure of proper operation, it is...
Doing so can crash the application. Use the right charger for batteries The rechargeable Li-Ion battery pack of Opticon can be charged in the cradle When you do not use the terminal for IRU1300 when it is in the terminal.
Opticon. screwdriver or a coin. Pen lite batteries. Remove old battery by simply taking out. Batteries that are not supplied by Opticon must be AA-size and absolutely leakproof. Installing Opticon battery pack: (ref. 2) If rechargeable batteries are used, they Follow the instructions on the label.
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE 2.5.6 How to (re) place the backup battery in the terminal? Make sure that the main battery is full enough while changing the backup battery. Only use CR2032 Li (Lithium, button type) battery.
Connect the interface cables. connectors, use the cables supplied Connect the power supply. by the manufacturer. Place the PHL1300 terminal in the cradle. When you need another cable for a certain device, that is not supplied, Connection sequence contact your supplier to purchase the for cradle network: right cable.
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE 2.6.3 DIP switch settings on cradle Setting the DIP switches on or off will result in differrent baudrates and enabled or disabled functions of the cradle. Open the cover of the DIP switches on the bottom of the cradle in order to reach the DIP switches.
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE The terminal is a Class I laser product conforming to the strictest laser safety standards. However, we recommend that you avoid looking directly into the laser beam emitter, or pointing the laser beam directly into someone’s eyes.
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE PIN-OUT 5.1 RS232 cable for cradle DB 9 DB 9 RS232 male Signal female Signal In/Out Note cable (cradle) (PC) (cradle) 6 + 1 not used 6 + 1 ON (fixed) not used ON (fixed) 5.2 RS485 cable for cradle network...
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE Keyboard 19 keys total SPECIFICATIONS CRADLE (18 keys user definable) Alpha/Numeric mode 6.2.1 Electrical specifications Programming Functionality is provided by user application. The application may Power supply 9V DC be downloaded from PC via Battery charging time when battery in terminal: cradle.
’ PHL1300 / IRU1300 S MANUAL TERMINAL CRADLE TROUBLE SHOOTING This chapter contains information on solving problems you may encounter when using the terminal and/or cradle. If problems occur, first carry out some general checks, before verifying the problem with the descriptions in this chapter.
Power indicator of the cradle is not green. high. Check if the battery case cover of the Decrease the distance between the bar PHL1300 is closed properly. code and the terminal. Clean the optical interface window of the cradle and/or terminal, and try again.
The main battery is exhausted. Message “Application halted” or “No application installed” is shown. Replace the battery pack, or charge the There is no user’s application for PHL1300 terminal in the cradle. loaded in the terminal. Contact your supplier. For example pressing the shift key does not toggle the shift indicator.