1. Manuals
  2. Brands
  3. Vicon Manuals
  4. Security Camera
  5. SurveyorVFTXX134-60-01
  6. Quick manual

Vicon SurveyorVFTXX134-60-01 Quick Manual

Camera domes
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Warning: To reduce a risk of fire or electric shock, do not expose
the indoor unit to rain or moisture.
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your
requirements or that the operation will be entirely error free or perform precisely as described in the
documentation. This system has not been designed to be used in life-critical situations and must not be
used for this purpose.
Copyright © 2007 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: 44/(0) 1489-566300
Vicon part number 8009-8134-60-01
SurveyorVFT Camera Domes
WEB: www.vicon-cctv.com
XX134-60-01
Quick Guide for
Section 3 Rev 108

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SurveyorVFTXX134-60-01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vicon SurveyorVFTXX134-60-01

Summary of Contents for Vicon SurveyorVFTXX134-60-01

  • Page 1 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation.

  • Page 3: Important Safeguards

    8. Accessories - Do not place the unit on an unstable surface following repair or maintenance to verify proper operation. to avoid falling. Use only UL Listed Vicon recommended mounting 22. ESD Precaution - Take all normal electrostatic discharge accessories.
  • Page 5 Introduction This Quick Guide provides an overview for installing the standard SurveyorVFT PTZ Camera Dome, the SVFT-M Impact-Resistant model, the SVFT-PRS Pressurized version and the SurveyorVFT Fixed models (coaxial, UTP, fiber and ViconNet versions). An abbreviated programming guide is also provided for the camera domes, excluding the fixed versions.

  • Page 6: Installation

    Quick Installation – Standard PTZ In-Ceiling Model 2 • Introduction XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...
  • Page 7 Quick Installation – Standard PTZ Indoor Pendant Introduction • 3 XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...
  • Page 8 Quick Installation – Standard PTZ Outdoor Pendant 4 • Introduction XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...
  • Page 9 Quick Installation – SVFT-M Impact-Resistant Introduction • 5 XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...
  • Page 10 Quick Installation – SVFT-PRS Pressurized 6 • Introduction XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...
  • Page 11 Quick Installation – Fixed In Ceiling, No Access to Ceiling Introduction • 7 XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...
  • Page 12 Quick Installation – Fixed In-Ceiling – Access to Ceiling 8 • Introduction XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...

  • Page 13: Indoor Pendant

    Quick Installation – Fixed Indoor Pendant Introduction • 9 XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...
  • Page 14 Quick Installation – Fixed Outdoor Pendant 10 • Introduction XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...

  • Page 15: Wiring And Setup

    Wiring and Setup Pin Connections – Standard SurveyorVFT and SVFT-M CONNECTOR TYPE CONNECTOR/PIN LABEL SIGNAL NAME CONNECTOR/PIN NUMBER BNC (female) VIDEO (J1) Video output VIDEO AMP Header (Fiber Optic board)* Video/RS-422 data TERMINAL BLOCK POWER (TB1) TB1-1 TB1-2 Neutral TERMINAL BLOCK ALARM (TB2) TB2-1 Alarm input 1...
  • Page 16 Wiring Connections – UTP Version 12 • Wiring and Setup XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide...
  • Page 17 CONNECTOR TYPE CONNECTOR/PIN LABEL SIGNAL NAME CONNECTOR/PIN NUMBER TERMINAL BLOCK POWER (TB3) TB3-1 TB3-2 Neutral TERMINAL BLOCK ALARM (P1) P1-1 Alarm output ALARM OUT P1-2 Ground P1-3 Alarm input ALARM IN RJ-45 LAN (J7) J7-1 Transmit + TX + J7-2 Transmit - TX - J7-3...

  • Page 18: Dip Switch Settings

    Pin Connections – SurveyorVFT Fixed Both power and video connections are made to the integral printed circuit board (PC board) on the camera mechanism. The PC board provides a board-mounted BNC connector for coaxial, a screw terminal for twisted pair video, an ST connector for fiber-optic or an RJ-45 connector on the ViconNet board for video connection and a removable two-position screw terminal connector for camera power.

  • Page 19: Software Features

    Programming the SurveyorVFT Programming is done by selecting options from the on-screen menu system using the AP (autopan), AI (autoiris), joystick and AUX1/AUX2 functions. The cursor wraps around when moving up and down. The following is a description of these controls: select and store parameters;...
  • Page 20 Preset 93 (Set Response Line Polarity) (Duplex Only) — The SurveyorVFT checks for polarity of the command in lines through the auto baud detect feature. The baud detect cycles through 4800+/4800- /9600+/9600-/19200+/19200-, indicating not only the baud rate it is searching for but also the polarity that the receive lines are set to.

  • Page 21: Programming Menus

    • To clear the autopan limits — Store preset 98. Press AUX 2 and AUX 3 without panning to set the autopan limits to the same position. By recording both limits on the same point they will both be deleted. The dome will now rotate continuously when placed in autopan mode until new limits are programmed.

  • Page 22: Vicon Standard Equipment Warranty

    Software supplied either separately or in hardware is furnished on an “As Is” basis. Vicon does not warrant that such software shall be error (bug) free. Software support via telephone, if provided at no cost, may be discontinued at any time without notice at Vicon’s sole discretion.

  • Page 23: Corporate Headquarters

    Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288) 800-645-9116 Fax: 631-951-CCTV (2288) Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Germany vin-videotronic infosystems gmbh...

Table of Contents