1. Manuals
  2. Brands
  3. Vicon Manuals
  4. Security Camera
  5. SurveyorVFT SVFT-M
  6. Installation & operation manual

Vicon SurveyorVFT SVFT-M Installation & Operation Manual

Maximum security camera dome
Hide thumbs Also See for SurveyorVFT SVFT-M:
Table of Contents

Advertisement

Quick Links

Download this manual
Warning: To reduce a risk of fire or electric shock, do not expose
the indoor unit to rain or moisture.
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your
requirements or that the operation will be entirely error free or perform precisely as described in the
documentation. This system has not been designed to be used in life-critical situations and must not be
used for this purpose.
Copyright © 2009 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
SurveyorVFT and Kollector are trademarks and ViconNet a registered trademark of Vicon Industries Inc.
ExView is a trademark of Sony Corporation.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: 44/(0) 1489-566300
Vicon part number 8009-8157-15-01
SVFT-M Maximum Security
WEB: www.vicon-cctv.com
XX157-15-01
Camera Dome
Section 3 Rev 209

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SurveyorVFT SVFT-M and is the answer not in the manual?

Questions and answers

Related Manuals for Vicon SurveyorVFT SVFT-M

Summary of Contents for Vicon SurveyorVFT SVFT-M

  • Page 1 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation.
  • Page 3 The product shows a significant change in performance. 6. Attachments - Use only UL Listed Vicon recommended attachments to prevent unit damage and personal injury. 20. Replacement Parts - Use only Vicon specified replacement 7.
  • Page 5 FCC Notice Note: Complies with Federal Communications Commission Rules & Regulations Part 15, Subpart B for a Class A digital device. WARNING This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instruction, may cause interference to radio and television reception.

  • Page 7: Table Of Contents

    Contents INTRODUCTION........................1 How to Use this Manual ..........................3 Accessory Kits..............................4 Unpacking and Inspection..........................4 SVFT-M Components .............................6 Housing ..............................6 Camera Drive ............................6 Shroud...............................6 Lower Dome ..............................6 Sunshield..............................6 INSTALLATION ........................8 Quick Installation............................8 Detailed Installation ............................9 WIRING..........................14 Typical Relay and Alarm Connections .......................16 Installing the Cables ............................17 Installation Configurations..........................21 Installing the Flash Upgrade and PC Direct Control ................22...
  • Page 8 REFERENCE ........................51 Coaxial Cable Recommendations ......................51 Twisted-Pair Cable............................52 1.5-inch Pipe Designation ........................... 52 Network Cable .............................. 53 TECHNICAL INFORMATION..................... 54 VICON STANDARD EQUIPMENT WARRANTY ............... 58 iv • 2BContents XX157-15-01 Rev 209 SVFT-M Maximum Security Camera Dome System...

  • Page 9: Introduction

    LAN interface board allows direct plug-in to a system network hub, switch or router. Video from the camera is available to all network recorders and workstations for live view and recording. The Vicon SVFT-M camera dome can be used in conjunction with competitive PTZ drivers through DIP switch selection. Audio input capability is available on the ViconNet version.
  • Page 10 Table 1 Models and Descriptions Model Number Product Environment/ Camera Mount Optical Zoom/ Lower Dome Code Cable Type Type/Format Type Total Zoom Type SVFT-M22 8747-00 Outdoor/Coax Color/NTSC Pendant 22x/264x Clear Polycarbonate SVFT-M22-C 8747-01 Outdoor/Coax Color/PAL Pendant 22x/264x Clear Polycarbonate SVFT-M22E 8748-00 Outdoor/Coax Color/NTSC...

  • Page 11: How To Use This Manual

    How to Use this Manual This manual was designed to provide the best overall instructions for the installation and operation of the SurveyorVFT Maximum Security Camera Dome. The graphics and terminology used in this manual have been carefully selected to enable a clear and distinct understanding of the SVFT-M and its components. This manual has been formatted to present distinct methods of installation for qualified service personnel only.

  • Page 12: Accessory Kits

    Installation section for details on applying the lubricant. Unpacking and Inspection All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility to provide suitable delivery. Inspect the cartons upon delivery and, if damage is present, make detailed notes on the carrier’s bill. Then, obtain the carrier agent’s signature and file a damage claim as soon as possible.
  • Page 13 Unpacking the SVFT-M 3BIntroduction • 5 XX157-15-01 Rev 209 SVFT-M Maximum Security Camera Dome System...

  • Page 14: Svft-M Components

    SVFT-M Components All SVFT-M units are comprised of a Rugged Housing, a Camera Drive, a Shroud and a Lower Dome. Figure 1 shows these components. Housing The housing for the SVFT-M has a die-cast aluminum housing with a sunshield. The housing has a 1.5-inch NPT pipe flange mount. In addition, the housing is equipped with a safety cord and clip that is used to suspend the camera drive during installation.
  • Page 15 3BIntroduction • 7 XX157-15-01 Rev 209 SVFT-M Maximum Security Camera Dome System...

  • Page 16: Installation

    Installation Quick Installation 8 • 4BInstallation XX157-15-01 Rev 209 SVFT-M Maximum Security Camera Dome System...

  • Page 17: Detailed Installation

    These steps provide the most thorough and accurate instructions The SVFT-M model mounts on a Vicon mount (refer to the Introduction section) or a 1.5-inch vertical pipe with appropriate coupling. The pipe is a standard 1.5-inch NPT type and must be oriented vertically so the SVFT-M can effectively hang from the pipe.

  • Page 18: Configuration

    a) Strip approximately 1 inch (25 mm) of the cable outer jacket to be terminated in terminal blocks TB1 and TB3. Then strip approximately 0.25 inches (6 mm) of insulation off of each individual wire. b) Refer to Wiring section and Table 2 to make all connections to terminal block TB1 (power), TB2 (alarms), TB3 (relays/control signals) and TB4 UTP video).
  • Page 19 13. Install the provided optional heater duct (recommended to minimize condensation problems). It is used to redirect warm air onto the lower dome surface. The duct snaps directly into the heater shell. Rotate the duct slightly counter-clockwise and insert the duct locking tabs into the heater shell. Refer to Figure below.
  • Page 20 16. Push the camera drive straight up into the housing until it snaps into the housing. Do not use excessive force. In the event that it does not snap easily, remove the SVFT-M and verify proper cabling. 17. Holding the lower dome, line up the 2 molded tabs on the lower dome with the 2 parallel surfaces of the housing.

Table of Contents