Reset Reader To Factory Defaults; General Safety Information - Code CR1200 User Manual

7.1 - Reset Reader to Factory Defaults

Scan the following codes to reset reader:
Reset to USB Factory
Default Settings
Clear All CodeXML Rules
Prefi x & Suffi x
Note: If you read this Code you will lose any unsaved
settings. Make sure to save the settings on your
reader before reading the codes.

7.2 - General Safety Information

Repairs and Adjustments—Only those individuals authorized by Code should attempt to make repairs or
adjustments to CR1200 equipment. If the reader casing is opened the warranty is voided.
Power Supply—Use only the power supply provided for use with each specifi c unit when operating Code
equipment.
Accessories—Only those accessories approved by Code should be utilized with Code equipment.
Non-compliance with any of the above may result in:
• Injury to individuals handling the equipment;
• Damage to the equipment; or
• Voiding of the maintenance contract.
Save Settings
Reset to PS/2 Factory
Default Settings
Reset to RS232 Factory
Default Settings
Save Settings
C003525_03_CR1200 User Manual 31